Resumen
The importance of heat sinks in electronic devices will be analyzed in this project, the different types, and the factors that affect the performance of a heat sink, like the geometry, size and number of fins, the speed of the flux, the material the heat sink is made of, the diameter and positions of the channels. To understand the difference between a het sink with a fan and one with microchannels a comparision is made in this project.Citas
. Zúñiga-Cerroblanco J.L., Hernandez-Guerrero, A., Rubio-Arana C., Popescu D., “Investigation of Pin-Fin Heat Sinks with Square, Cylindrical and Elliptical Pins for Electronic Cooling Performance, “ECOS 2008 (Efficiency, Costs, Optimization, Simulation, and Environmental Impact of Energy Systems, Krakow, Poland, June 24-27, 2008, pp. 337-344, Vol. 1, ISBN 978-83-922381-4-0.
Luviano-Ortiz, L., Hernandez-Guerrero, A., Rubio-Arana, C., Romero-Mendez, R., “Heat Transfer Enhancement in a Horizontal Channel by the Addition of Curved Deflectors”, International Journal of Heat and Mass Transfer, Vol 51/15-16 pp 3972-3984, 2008. ISSN: 0017-9310
J. Luis Zuñiga-Cerroblanco, Hernandez-Guerrero, A. G.J. Kowalski, J.C. Rubio-Arana, “Geometrical Effects In Optimal Performance Of Energy Dissipation Of Pin Fin Heat Sinks”, 2009 ASME International Mechanical Engineering Congress & Exposition (IMECE09), November 13-19, 2009 Lake Buena Vista Florida, ISBN 978-0-7918-3863-1.
. C.A. Rubio-Jimenez, S.G. Kandlikar, A. Hernandez-Guerrero, “Performance of On-line and Offset Micro Pin-Fin Heat Sinks with Variable Fin Density”, IEEE Transactions on Components, Packaging and Manufacturing Technology, TCPMT 060, Vol. 3, Issue 1, pp.86-93, Enero 2013.
Ramirez-Vazquez J.P., Hernandez-Guerrero A., Zuñiga-Cerroblanco J.L., Rubio-Arana J.C., “Novel Arrangement for Pin-Fin Heat Sinks”, ECOS 2013 (26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems), July 16-19, 2013, Guilin, China.
Carlos A. Rubio-Jimenez, Abel Hernandez-Guerrero, Cuauhtemoc Rubio-Arana, Daniela Popescu, “Comparison Between Traditional Microchannels Heat Sinks and Microchannels Heat Sinks based on Biomimical Tendencies,” ESDA 2008, 9th Biennial ASME Conference on Engineering Systems Design and Analysis, Haifa, Israel, July 7-9, 2008.
Zuñiga-Cerroblanco J. L., Hernandez-Guerrero A., Rubio-Jimenez, C., Rubio-Arana, “Optimization and Design of Pin-Fin Heat Sinks Using Minimum Entropy Generation”, ECOS 2012 (25th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems), June 26-29, 2012, Perugia, Italy.
Carlos Alberto Rubio Jiménez, Jesús García González, Abel Hernández Guerrero, José Cuauhtémoc Rubio Arana, “Teoría Constructal Aplicada a Disipadores de Calor de Tipo Microcanal”, XIV Congreso Anual de la Sociedad Mexicana de Ingeniería Mecánica, Puebla, 17-19 de Septiembre, 2008. pp. 1297-1306 ISBN: 978-968-9773-03-8.
Carlos Alberto Rubio-Jimenez, Abel Hernandez-Guerrero, Jose Cuauhtemoc Rubio-Arana, Kandlikar, “Nature Patterns Applied to the Design of Microchannel Heat Sinks”, 2009 ASME International Mechanical Engineering Congress & Exposition (IMECE09), November 13-19, 2009 Lake Buena Vista Florida, ISBN 978-0-7918-3863-1.
Jaime Cervantes, Juan Tadeo Isidoro Cruz, Abel Hernandez-Guerrero, “Flow Maldistribution in Microsystems, Description and Effects”, accepted, ASME 2013 International Mechanical Engineering Congress & Exposition, November 15-21, 2013, San Diego, California, USA, paper IMECE2013-63044.
https://es.wikiversity.org/wiki/ProgramacionIngenieriaMecanicaUPB:Grupo_1320_03
http://es.aliexpress.com/w/wholesale-channelnessed-cooling-water.html
http://ocw.uma.es/ingenierias/electronica-de-potencia/otros-recursos-1/Disipacion_de_Calor.pdf
Esta obra está bajo una Licencia Creative Commons Atribución-NoComercial-SinDerivadas 4.0 Internacional.